Magnetic Drive Pumps Inline Chemical Liquids MP-70R

Magnetic Drive Pumps are completely-sealed Pumps.

Magnetic drive pump runs via the driving force between the rotor and the shaft. The pump is completely sealed, and it does not need a mechanical seal. The  completely-sealed magnet pump would never leak, like other pumps with a failed seal. It is always used to transfer corrosive liquids, such as acid, other chemical liquids, saltwater, sewage, polluted water, and other industrial liquids.

Magnetic drive pumps are extremely energy efficient and are suitable for continuous operation.

The pump chamber is completely separated from the motor, so that the motor heat can not be transferred into the liquids. The magnetic drive pumps have reduced friction, wear, and noise than the direct driving pumps, so that is much efficient and suitable for continuous operation.

Magnetic drive pumps are the most used pumps.

The pump has an fiberglass-reinforced polypropylene wet end, which is highly corrosion-resistant and withstands a lot of acids and other chemical water. It can be used in:

• chemical water, such as sulfuric acid, nitric acid, hydrochloric acid, acetic acid, sodium acid, bromine water, alcohol, acetone, ammonia liquid, aqua regia, formaldehyde, kerosene, methyl, toluene and a lot of other chemical water.
• Pharmaceuticals
• Electroplating
• Photograph Processing
• Metal and mining water transfer
• Food and beverage
• Medical
• Sewage & water treatment
• Pollution control, dirty water
• Saltwater & marine aqua.

It can not be used in:

• Liquids containing ferrous solids
• Freon 12
• Gasoline
• Xylene
• Oleum
• Hydrofluoric acid above 60%

Specification data:

• 220-240 volt 50/60Hz
• Model:MP-70R
• 2 connection version available to choose: soft tube connection( with Suffix R) and threaded connection( with suffix RM).
• Such as: MP-15R has a soft tube connection, while MP-15RM has a threaded connection.

Feel confident to choose your pump from the largest range!

Model	Soft tube connection		Threaded connection		Qmax (L/min)	Hmax(m)	Standard Output		Gravity	Motor
	Inlet (mm)	Outlet (mm)	Outlet (inch)	Tube (mm)	50Hz/60Hz	50Hz/60Hz	Flow (L/min) 50Hz/60Hz	Height(m) 50Hz/60Hz		Output (Wats) 50Hz/60Hz	Phase
MP-6R	14	14	-	-	8/9	1/1.4	2.8/5	0.8	<1.2	6	1
MP-10R	14	14	-	-	11/12	1.5/2.1	5/8	1	<1.1	6	1
MP-15R	16	16	-	-	16/19	2.7/3.4	8/12	1.5	<1.3	10	1
MP-15RM	-	-	3/4	13	16/19	2.4/3.4	8/12	1.5	<1.3	10	1
MP-20R	18	18	-	-	27/32	3.1/4.3	17/22	2	<1.2	15	1
MP-20RM	-	-	3/4	16	27/32	3.1/4.3	17/22	2	<1.2	15	1
MP-20RX	26	26	-	-	46/52	1.8/2.5	30/40	1	<1.3	15	1
MP-20RXM	-	-	1	20	46/52	1.8/2.5	30/40	1	<1.3	15	1
MP-20RZ	18	18	-	-	10/11	4.6/6.9	7/10	4	<1.1	15	1
MP-20RZM	-	-	3/4	13	10/11	4.6/6.9	7/10	4	<1.1	15	1
MP-30R	20	20	-	-	33/38	3.8/5.4	16/25	2.5	<1.3	25	1
MP-30RM	-	-	3/4	16	33/38	3.8/5.4	16/25	2.5	<1.3	25	1
MP-30RX	26	26	-	-	62/72	2.9/4.1	32/46	2	<1.1	25	1
MP-30RXM	-	-	1	20	62/72	2.9/4.1	32/46	2	<1.1	25	1
MP-30RZ	18	18	-	-	15/17	8/11	10/14	6	<1.1	25	1
MP-30RZM	-	-	3/4	13	15/17	8/11	10/14	6	<1.1	25	1
MP-40R	20	20	-	-	45/52	4.6/6.5	22/34	4	<1.1	65	1
MP-40RM	-	-	3/4	16	45/52	4.6/6.5	22/34	4	<1.1	65	1
MP-40RX	26	26	-	-	75/85	3.3/4.7	47/65	2	<1.1	65	1
MP-40RXM	-	-	1	20	75/85	3.3/4.7	47/65	2	<1.1	65	1
MP-55R	26	26	-	-	60/70	5.6/8.2	30/45	4	<1.2	90	1or3
MP-55RM	-	-	1	20	60/70	5.6/8.2	30/45	4	<1.2	90	1or3
MP-55RZ	26	26	-	-	25/28	10/14	15/22	8	<1.1	90	1or3
MP-55RZM	-	-	1	20	25/28	10/14	15/22	8	<1.1	90	1or3
MP-70R	26	26	-	-	86/97	6.7/9.7	50/72	4	<1.1	150	1or3
MP-70RZ	20	20	-	-	40/43	14.3/20.3	20/24	12	≤1.1	150	1or3
MP-70RM	-	-	1	20	86/97	6.7/9.7	50/72	4	<1.1	150	1or3
MP-100R	26	26	-	-	120/130	8.6/11.6	60/70	7/9	<1.3	250	1or3
MP-100RM	-	-	1	20	120/130	8.6/11.6	60/70	7/9	<1.3	250	1or3
MP-100RX	-	-	11/4	32	170	9.0	100	5.0	<1.3	250	1or3
MP-120R	-	-	11/2	36	220	10.5	140	6.0	<1.3	370	1or3
MP-120RT	-	-	21/4	48	220	10.5	140	6.0	<1.3	370	1or3
MPH-400CV5-D	-	-	11/2	36	220	12.5	150	8	<1.3	400	3
MPH-401CV5-D	-	-	11/2	36	260	18	120	12	<1.3	750	3
MPH-422CV5-D	-	-	2	11/2	320	21	160	18	<1.3	2200	1or3
MPH-423CV5-D	-	-	2	11/2	380	22	230	18	<1.3	2200	1or3